The purpose of a float switch is to open or close a circuit as the level of a liquid rises or falls. Most float switches are "normally closed," meaning the two wires coming from the top of the switch complete a circuit when the float is at its low point, resting on its bottom clip or stop (for example, when a tank is dry).

The plastic float level switch is widely used in the household application .It has many features ,like the small size , simple working principle ,highly reliable and low cost .Working temperature :-20 degree to +80 degree.

The stainless steel level sensor can work in -40 degree to 200 degree environment. Standard sensors are made of 304 grade stainless steel. Customer can define the stainless steel 316 material.

§ Made of PP, Stainless steel material;
§ Classic design, compact size;
§ Choice of normal open or normal close;

High voltage & power reed relays are available in packages for up to 10,000 VDC switching. These particular series work very well in high voltage applications.

Compared to other relay technologies ,reed relays have the advantages of hermetically sealed contacts, low coil power, fast operation ,long life and small size.

​It is a high voltage relay series design in a PCB through hole package with option cable ,capable of switching voltage up to 10KV and breakdown voltage up to 15VDC. standard available in 1 from A and 1 form B switching configurations.

​It is a high voltage relay series design in a PCB through hole package with option cable ,capable of switching voltage up to 10KV and breakdown voltage up to 15VDC. standard available in 1 from A and 1 form B switching configurations.

One Programmable Multi-Frequency TPMS Sensor with Metal Valve Stem by Smart Sensor®. Mounting Method: Clamp-In.

​The sensor is in a normally open position. When the fluid level in the reservoir tank is low, the magnet in the float activates the Reed Switch sending a voltage output to the customer electrical interface.

This sensor is installed in the coolant circuit. The engine control module uses its signal to determine the temperature of the engine.

​Cold Start Valve Temperature Switch; Direct-fit OE replacement ensures proper fit, form, and function for ease of installation.

PIPE: Stainless steel, SUS304, SUS316
FLOAT: NBR, PP

​Place of Origin: Shanghai, China
Brand Name: Misensor
Model Number: FLS-S series

Place of Origin: Shanghai, China
Brand Name: Misensor
Model Number: FLS-L series

​The sensing system is located in the fuel tank and consists of a float—usually made of foam and connected to an actuating metal rod—attached to a variable resistor.

The water flow sensor is mainly composed of a stainless steel body, a water flow rotor assembly and a Hall sensor.

The water flow sensor is mainly composed of a stainless steel body, a water flow rotor assembly and a Hall sensor.

Flow switch,is the impact of using a permanent magnet to float the magnetic repulsive force and flow to interact with reed switch signal output (0/1), by the repulsive force between the permanent magnets with respect to mechanical spring to reset, more reliable, longer service life, lower flow start.

--Connection size of others: min 6mm, 1/4'', 1/2'', 3/4'', 1''
--Flow range: min 0.15L/min, max 300L/min.
--Material:Plastic, brass/copper, POM food grade